tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and im provement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com the actf8015/866.0/qcc8c is a low-loss, compact, and economical surface-acoustic-wave ( saw ) rf filter in a surface-mount ceramic qcc8c case with cent re frequency 866.0 mhz. 1. package dimension (qcc8c) 2. marking laser marking 3. test circuit pin configuration 2 input / output 6 output / input 1, 3, 5, 7 to be grounded 4, 8 case ground sign data (unit: mm) sign data (unit: mm) a 2.08 e 1.20 b 0.60 f 1.35 c 1.27 g 5.00 d 2.54 h 5.00 issue : 2 c1u date : sept 06
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and im provement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 4. typical frequency response 5. performance 5-1. maximum ratings rating value unit maximum input level p 0 dbm maximum dc voltage v dc 10 v operable temperature range t a -10 to +65 c storage temperature range t stg -40 to +85 c issue : 2 c1u date : sept 06
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and im provement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 5-2. electronic characteristics ( t a = 25 c ) l caution: electrostatic sensitive device. observe precautions for handling ! note: 1. the frequency f c is defined as the midpoint between the 3db frequencies. 2. unless noted otherwise, all measurements are made with the filter installed in the spec ified test fixture that is connected to a 50 ? test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter centre frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. characteristic minimum typical maximum unit centre frequency f c D 866.000 D mhz 3db bandwidth bw 3 D 19 D mhz usable passband bw D 4.0 D mhz insertion loss il within f c 4.0 mhz D 3.0 4.5 db amplitude ripple (p-p) ? within f c 4.0 mhz D 1.2 2.0 db absolute attenuation f c 400.0 ~ f c 30.0 mhz f c 50.0 ~ f c 400.0 mhz 42 40 52 48 D D db db terminating impedance 50 ? // 10nh issue : 2 c1u date : sept 06
|
